Arlo Setup Camera

Arlo Camera Setup

Arlo cameras need to connect to the Base Station, which communicates with your home's Wi-Fi network. Before we pursue to tell you how to sync Arlo camera, first know how to set up Arlo?

How To Sync Arlo Setup Camera?

That blog will be going to tell you the process of doing sync of the Arlo setup camera. Well, the instruction we provide you applies on the setting up Arlo Pro 2 and Arlo pro camera. So, in case you like the idea of a security camera that is entirely wireless in every way then, the Netgear Arlo camera pro system is considered as the best. Well, in the next section, we provide you with the Arlo set up process, and while you begin keeping tabs on your home, you're away. No doubt, Wi-Fi cameras have their problems as compared to wired cameras. Still, they certainly provide you with a more straightforward installation. Now, you might be thinking of what makes this Netgear Arlo Pro 2 camera unique or separate from other cameras. So, the thing that separates the Netgear Arlo Pro 2 setup from other Wi-Fi cameras is battery-powered. That means you don't need to plug it into an outlet to stream and record a video. On the other hand, Wi-Fi cameras need to be connected to some power source, although they connect through Wi-Fi to data transmitting.

Also, Arlo Pro uses its hub central called the Base Station by which all of Arlo cameras' setup of yours connects. Well, that is due to the cameras use Z- Wave to communicate wirelessly, rather than Wi-Fi like most other consumer-based security cameras, e.g., Nest Cam. Due to this, Arlo cameras need to connect to the Base Station, which communicates with your home's Wi-Fi network. Before we pursue to tell you how to sync Arlo camera, first know how to set up Arlo?

Steps For Setting Up Netgear Arlo Camera 

So, for doing the Arlo Netgear setup of the camera, first, you need to download and set up the app of Arlo. However, it would help if you used the Base Station. That setup process is pretty painless and only takes about 10 minutes. Then, later follow the steps mentioned below;

  • Open up the app and tap to the button of New to Arlo.
  • On the next step, choose which Arlo product you're setting up. In this case, it's the Arlo Wire-Free.
  • Here, the app will now tell you to install the Arlo Base Station center. To do this, into the Base Station, plug the one end of the included Ethernet cable into the and the other end into a free Ethernet port on the router of yours. Plugin the power cord, and then press the On-Off button next to the power connector on the hub's back.
  • Once you have got the Base Station set up, hit the button of Continue in the app.
  • Wait for the hub to power up. The app automatically searches for the center on your network.
  • When it's ready, tap Choose Timezone in the app.
  • Select your time zone, hit Save in the top-right corner, and then tap the back arrow in the top-left corner.
  • Tap Continue to proceed.
  • Next, give the Base Station a name. Now, one can be as creative as they want here. But do remember that something simple will work just fine. Hit the Continue button once when you're done with the Arlo setup of the camera.

Well, that's how you can do www Arlo com setup. Now, to know the process of how to sync Arlo camera, you need to scroll down and read the next section.

Process Of Syncing Arlo Netgear Com

As you know, in this section, you will know the syncing Arlo Netgear Com camera. Thus, read the penned below step for syncing the Arlo setup camera. 

  • First, by sliding and holding the latch, you need to unlock the battery compartment.
  • In this step, lift it to open the compartment by sliding the battery door back.
  • Here, you need to put the battery and close the door of it.
  • Put the Netgear Arlo camera at a distance of 30 to 100 cm that is one to three feet, as it is the station's base.
  • Now, sync the camera to the bottom of the Arlo Netgear login station. In case you are using an Arlo base station, then hold the button of syncing on the side. Or else you can press it on the back of the base station for at least two seconds and then release the button.
  •    
  • You need to note that, if you press the free Wi-Fi Arlo setup button of syncing on the station base for a longer time, then, under the USB symbol LED blinks yellow-brown for 10 minutes. While the USB LED is blinking yellow-brown, the process of syncing is blocked.
  • If you are using the Netgear Arlo Pro 2 base station, press the button on the base station's top for about two seconds and then release the button.
  • Now, wait for the status of the syncing LED to blink green.
  • Click the button of syncing on top of the camera for about two seconds and then release the button. 

By using these mention above steps, you can easily sync the Arlo setup camera. Here, you may be thinking of how you came to know about the Netgear Arlo Pro 2 or camera syncing confirmation. Well, for this, you don't need to worry as in the below, we listed out the step of confirmation. 

Way Of Arlo Netgear Com Account Camera Syncing Confirmation

You may know that the camera should be synced once at a time. So, in the above, you already know the process of Arlo setup camera syncing. Thus, here you will see the confirmation way. 

  • So, the blue LED light on the camera blinks rapidly, then it shows that it confirms your syncing.
  • But, if the LED on the camera blinks amber, then the sync is not successful. You must repeat the sync process.
  • Check the camera LED on the base of the Arlo setup station.
  •  
  • So, the camera LED on the base station turns solid green. The sync process is complete.

That's how to sync Arlo camera so, repeat these steps for every Arlo setup camera. But kindly note, in case you do not complete the sync process within 60 seconds, then hold the syncing button on the base station and try again. Lastly, we hope you understand the whole blog on syncing the Netgear Arlo camera. Yet, if you want to know regarding Arlo Netgear Login, tell us as we are indeed happy to help you with this.